GunLock (1, 2, 3, or All)

(Controls, Control Head - O9 / Keypad)

HGDefinitionMob.jpg

These four separately programmed button-presses, GunLock 1, GunLock 2, GunLock 3 and GunLock All, allow the radio-user to unlock GunLock 1, 2, or 3, or all GunLocks simultaneously. This feature is available while operating in Conventional or Trunking communications mode.

HGWarning.jpg

 

Control of a GunLock is accomplished through one of the radio's VIP Out pins, where a "GunLock 1" button-press activates the VIP Out chosen as "GunLock 1", and so on. WFPrior.png Therefore, you must first select GunLock 1, GunLock 2, or GunLock 3 as a VIP Out; otherwise the corresponding button selection is invalid.

HGWorkflowNote.jpg

 

WFPrior.png Immediately following the button-press, the corresponding VIP Out remains active for the amount of time selected in the Relock Timer field.

  • "Relock Timer 1" (that is, the first record / row) applies to a GunLock 1 button-press, and so on.

  • While the VIP Out is still active, pressing the corresponding GunLock button again restarts the Relock Timer.

  • If the Relock Timer field is set to "Momentary", the corresponding VIP Out deactivates immediately with the release of the GunLock button (thereby re-locking the GunLock); the radio-user must keep the button pressed with one hand while using the other hand to remove the gun.

GoArrow.jpg

Go to the Button Selections Page